Showing all 8 results

Show sidebar
emsodur-c
Close

Emsodur C

As a rule, the deburring temperature of rubber parts is between -20°C and -140°C. Low-cost Emsodur C sands are suitable for this type of deburring process.
Properties:
  • High breaking strength
  • Shape stability
  • Full Cubic/Cylindrical cut
  • Abrasion resistance
  • Ability to use at very low temperatures
  • Very long service life
  • Cost-effective
Sizes & Colors:
  • 0.5mm - 0.75mm - 1.00mm - 1.20mm - 1.5mm
  • Cylindrical or cubic
  • Natural or white
Read more
emsodur-gv
Close

Emsodur GV

It is a nylon-based sandblasting material with increased specific gravity. It is suitable for removing metal casting burrs from the part.
Properties:
  • Precise Cubic geometry
  • High kinetic energy
  • Long-term use
  • Particle sizes range from 0.75mm to 1.5mm.
Read more
emsodur-n-kubik
Close

Emsodur N (Cubic)

Duroplast is a nylon-based sandblasting material used for deburring and surface cleaning of parts.
Properties:
• Precise dimensions,
• Cubic cutting,
• Very long-lasting,
• Abrasion resistant,
• The color does not get on the part to be cleaned.
Read more
Placeholder
Close

Emsodur N (Cylindrical)

Duroplast is a nylon-based sandblasting material used for deburring and surface cleaning of parts.
Properties; * Precise dimensions * Cylindrical sizes * Very long life span * Wear-resistant * The color does not get on the part to be cleaned * Gives parts a clean and smooth surface * Shatter-resistant *Antistatic
* Dimensions: 0.20 / 0.3 / 0.4 (mm)
* Natural color.
Read more
emsodur-s
Close

Emsodur S

Properties
  • High fracture strength,
  • Shape stability,
  • Full Cubic/Cylindrical cutting,
  • Resistance to abrasions,
  • Ability to be used at very low temperatures,
  • Very long life,
  • Affordable cost,
Sizes & Colors
  • 0.5mm - 0.75mm - 1.00mm - 1.20mm - 1.5mm,
  • Cylindrical or cubic,
  • Natural or white,
Read more
emsodur-type2-urea
Close

Emsodur Type II Urea

Duroplast is used as a cleaning material on polishing surfaces, deburring and paint removal. It can be used in dry and wet polishing techniques. Barcol 54-62 (3.5 MOH) can be used in dry and wet polishing techniques with its medium hardness structure.
It is a versatile abrasive suitable for a variety of cleaning and paint removal applications such as aircraft, vehicles, trucks, trailers and boats. Excellent results are obtained for the removal of paints and composite materials, graphite, as well as for the cleaning of injection molds and printed circuit boards.
Read more
emsodur-type2-urea
Close

Emsodur Type III Melamine

In areas where embossing and cleaning of difficult painted surfaces with hard shell content is required, Barcol 64-72 (4.0 MOH) with its top hardness structure is an aggressive alternative to glass beads and other hard abrasives. Excellent results are obtained in the removal of stubborn paints, hydrocarbon deposits and other hard material such as moulds, engines, iron and steel.
Read more
emsodur-type5-v
Close

Emsodur Type V Acryl

It is best suited for sensitive coating surfaces and other such applications. It is perfect for removing powder coatings on aircraft parts, aluminum material surfaces, fine fiberglass and fine precision metal plates.
With its soft Barcol Hardness of 46-54 (3.2 – 3.5MOH), it is the most suitable media for sensitive surfaces.
Standard Mesh Sizes:
8/16, 8/20, 10/20, 16/20, 20/30, 30/40, 60/80, 80/120.All types are Mil-P-858991A approved.
Read more